Electrical connection
MAK sample gas conditioner must be installed as shown in the electrical circuit diagram, illustration 5. The cross-section of access lines and the local fuse rating must conform to the maximum power consumption as mentioned on the rating plate. 
Power is supplied via cable and the mains plug. The feed length should not exceed 3 m for the given fuse rating.
Requirements of VDE 0100 as well their relevant standards and guidelines must be adhered to while setting up high-voltage devices with rated voltages of up to 1000 V.

0 Contents 2
1 Safety instructions 3
2 Technical specifications 6
3 Description 7
3.1 View of MAK 7
3.2 Control keypad with status displays 8
4 Intended application and tasks of MAK 11
4.1 Cooling the sample gas 12
4.2 Condensate and condensate discharge 14
4.3 Optional components 14
4.4 Service 15
5 Electrical connection 16
5.1 Mains supply 16
5.2 Circuit diagram of the electronic control unit 16
6 Installation instructions 17
7 Commissioning 17
7.1 Supply connections 18
8 Decommissioning 18
9 Alarm statuses and their redressal 19
9.1 Service alarm 19
9.2 TLO alarm 19
9.3 TA alarm 19
10 Spare parts lists 20
11 Guarantee conditions 20
12 Appendix 21


Facebook Google twitter
Từ khóa:
Cùng Chuyên Mục
Blogger Comments
Facebook Comments

Tin Tức Online
Xem Thêm Tất Cả »
Góc Chia Sẻ
Xem Thêm Tất Cả »
Game - Ứng Dụng Hay Tháng 8
Xem Thêm Tất Cả »
Góc Thư Giản
Xem Thêm Tất Cả »
Bài Viết Ngẫu Nhiên
Copyright © 2016 - All Rights Reserved
Template by Bùi Đạt - Powered by Blogger | SiteMap